Friday, 11 April 2014

Mechanical Projects


Mechanical Projects:

This category consists of Mechanical Projectslist, Mechanical final year projects,Mechanical Projects reports and ideas,Mechanical Projects for diploma students. Here we provide project reports and simple mechanical projects, mini mechanical projects,mechanical projects list,free mechanical projects,mechanical projects for diploma,final year mechanical projects,mechanical projects for engineering students,mechanical projects topics
  1. Mechanical Project on Auto Turning Fuel Valve
  2. ANTI THEFT WHEEL LOCKING SYSTEM Mechanical Project Abstract
  3. AirCraft Auto Pilot Roll Control System Mechanical Project Presentation
  4. Air-conditioning and Air-conditioning System Design AutoCad Mechanical Project
  5. AIR DEFENSE GUN Mech Project
  6. Air Driven Engine Mechanical Engineering Final Year Project Report
  7. ADVANCEMENTS IN TECHNOLOGY AND THEIR IMPLICATIONS ON ENTREPRENEURSHIP Mechanical
  8. ADVANCED FINE FINISHING PROCESSES Mechanical Paper
  9. ACTIVE MAGNETIC BEARINGS (AMB) Mechanical Final Year Project
  10. ABRASIVE JET MACHINING AND STUDY OF PROCESS PARAMETERS Mtech Mech Seminar
  11. A NOVEL REAR END COLLISION ACCIDENT AVOIDANCE SYSTEM WITH DYNAMIC SPEED GOVERNOR
  12. A new Slip Line Theory For Orthogonal Cutting Mech Paper Presentation
  13. Fly-by-wireless-Power-by-wire-Fly-by-optics-Mechanical-Seminar
  14. BE Mech Final Project on KEY CONTROLLED-FORKLIFTER
  15. Light Following Robot Mechanical Technical Seminar Report
  16. Kinematics Based on Four Bar Linkage BE Mechanical Seminar Topic & Project Report
  17. INFLUENCE OF SHAPE OF DIRECTRIX ON THE COST OF RC CYLINDRICAL AND CONOIDAL SHELLS
  18. Independent Suspension System Dept of Mechanical Engineering Final Year Project
  19. Hydrogen Fuel Cell Operated Remote Control Car Btech Mechanical Project
  20. Hydraulic Pumps and Pressure Regulation Mechanical Engineering Project
  21. MAGNETIC BRAKING SYSTEM Mechanical Technical Presentation
  22. GAS KIT FOR TWO WHEELER Mechanical Mini Project
  23. GREEN NANOTECHNOLOGY IN AUTOMOBILES Mechanical Student Project
  24. GPS AND WEAPON Technology Mechanical Seminar Topic
  25. Mechanical Project on Future Electrical Steering System
  26. FEA of Al-SiC Composite in Engine Valve Guides Mech Project Report
  27. Robotic ARM Control Through Internet Lan for Patient Operation
  28. ROBOTIC ARM Mechanical Robotics Projects
  29. REMOTE OPERATED FORK LIFT Btech BE Mechanical Final Report
  30. REMOTE CONTROLLED ELECTRICALLY OPERATED HYDRAULIC JACK
  31.  Regenerative Braking System Project For Mechanical Students
  32. REAL TIME SEQUENCE CONTROL SYSTEM FOR MACHINES
  33. RADIAL PISTON ENGINE Mechanical Final Student Project
  34. QUASI-ISOTHERMAL EXPANSION ENGINE FOR Cryogenic Automotive Propulsion
  35. GAS TURBINE BLADES ROTOR BLADE USING NICKEL BASED SUPER ALLOY
  36. Mechanical PROJECT REPORT ON CENTER JACK FOR CARS
  37. BIODIESEL IN DIESEL ENGINES Latest Mechanical Project
  38. PIEZOELECTRIC CAR Mechanical Project Idea
  39. MECHANICAL STUDENT PROJECT ON CNC MACHINES
  40. Power Generation Using Speed Breakers And Efficient Use of Energy
  41.   PLASMA ARC WELDING AND MACHINING Project Reports
  42. PLANER MILLING MACHINE ACCOMMODATED WITH DRILL HEAD
  43. OPTIMUM DESIGN OF AN ACOUSTIC ENCLOSURE FOR DIESEL GENERATOR
  44. OPTIMAL BLENDING OF POLANGA OIL WITH DIESEL IN CI ENGINE USING ARTIFICIAL NEURAL NETWORKS
  45. Numerical Control Machine Btech Mechanical Engineering Project
  46. NON CONVENTIONAL SOURCES OF ENERGY Mechanical Project Ideas
  47. MS BAR AND MS FLAT SMALL SCALE INDUSTRY PROJECT Report For Mechanical Branch
  48. MODERNIZATION IN RAILWAYS Mechanical Engineering Project
  49. Modeling of Armature Controlled DC Motor Using MATLAB Project Report
  50. Mechanical Projects On Modeling And Fatigue Analysis Of Automotive Wheel Rim
  51.  METHODS OF IMPROVING PERFORMANCE OF THE GAS TURBINE Mech Document
  52. Mercedes Benz Project report For Mechanical final Year Students
  53. Control of Boiler Operation using PLC-SCADA Mechanical 2011 Project
  54. ROBOTIC TROLLEY FOR MATERIAL HANDLING
  55. THE PROBLEM OF CONTROLLING FOUR-STROKE ENGINES
  56. The potential for generation of hydroelectric power using the Jhimruk river
  57. PROJECT REPORT ON STUDY OF QUALITY EQUIPMENTS
  58. STRUCTURAL PROPERTIES AND CHARACTRIZATION ISSUES OF CLAY BASED HYBRID NANOCOMPOSITES
  59. Synthetic Oil Technology Mech Projects Idea
  60. Submarines Mech Project Pdf
  61. Steel Company Modernization Mechanical Project Work
  62. Solar Sails Mech Project Report for Students
  63. SAFETY AIRBAGS IN CARS Mech Project report
  64. SIMPLE MAGNETIC LEVITATION TRAIN Btech Mech Project
  65. Sheet Metal Design Mechanical Project Report
  66.   Mechanical Project Report on Small Scale Industries (Automobile control cables)
  67.   Automatic Pneumatic Bumper For Four Wheeler Final Year Mech Project
  68.   Design Of An Auto-Tilting Car Mechanical Project Report
  69.   Vehicle Gas Detection With Automatic Safety Warning System Project
  70.   Electricity Generation from Speed Breaker Mechanical Project
  71.   Mechatronics Mechanical 2012 Project Document
  72.   Magnetic Abrasive Finishing Process Mechanical Project
  73.   Project Report on Tribological and Mechanical properties of Metal Bearings
  74.   HEAT TRANSFER PERFORMANCE IN 3D INDUCED FINNED HEAT PIPE PROJECT PPT
  75.   Weapon Technology & Global Positioning System (GPS) Final Year Project
  76.   DEPARTMENT OF MECHATRONICS AND MECHANICAL ENGINEERING GEAR SHIFTING PROJECT
  77.   Function Of Mechanical Braking System Final Year Abstract
  78.   Fuel Injection in the Compression Ignition Engine Project Presentation
  79.   SPEED CONTROL OF BLDC MOTOR USING SINUSOIDAL PWM USING FPGA MECH PROJECT
  80.   Mechanical Project Documentation on Forged Steel and Powder Metal Connecting Rods
  81.   MTech Mechanical Project Report on Failure Analysis of Shell and Tube Heat Exchanger
  82.   Fabrication Of Vertical AXIS Wind Turbine & Horizontal Axis Wind Mill
  83.   Manufacturing Of PVC Pipe Bachelor Of Technology Mechanical Engineering Project
  84.   Electronic magnetic Forming (EMF) Dept Of Mechanical Engg Final Year Project
  85.   Electro Magnetic Crane Mechanical Project Report
  86.   Effect of Rim Thickness on Bending Stresses in Low Addendum Large Spur Gears Project Paper
  87.   Mech Major Project on Design of Mobile Phone Holder for Automobile Steering Wheel
  88.   Design & Fabrication of a Tension Less Two Wheeler Bike Mechanical Mini Project
  89.   Design & Execution of Hydraulic Operated Fixture Mech Project Documentation
  90.   Design of Tesla Turbine Mechanical Engineering Project Report
  91.   Mechanical Final Year Project Report on Design of Boiler Stack
  92.   Project on DESIGN FABRICATION AND PERFORMANCE EVALUATION OF GARDEN TILLER
  93.   Design Development & Fabrication of Hydraulic Escalator Project Report
  94.   Mechanical Final Year Project on Design and Fabrication of Tyre Coupling
  95.   PROJECT REPORT ON DESIGN AND FABRICATION OF PULSE TUBE REFRIGERATION SYSTEM
  96.   PROJECT REPORT ON DESIGN AND FABRICATION OF PLATE FREEZER
  97.   DESIGN & FABRICATION OF SUSPENSION SYSTEMS Mech Project Report
  98.   EMISSIONS REDUCTION USING HYDROGEN FROM PLASMATRON FUEL CONVERTERS
  99.   Mech Project & PPT on DESIGN AND ANALYSIS OF A TWO STROKE PETROL ENGINE TEST RIG
  100.   DESIGN & FABRICATION OF SUSPENSION SYSTEMS Mech Project Report
  101.   Department of Mechanical Engineering Project Abstract on DEMONSTRATION OF COOLING EFFECT USING SOUND WAVES
  102.   CRYOGENIC ROCKET ENGINE HYDROGEN FUEL SYSTEM
  103.   Project Report on COST EFFECTIVENESS OF MINERAL WOOL INSULATION and PERLITE INSULATION
  104.   Cool Air Equals Power TURBO INTERCOOLER Engineering Mechanical Project Report
  105.   Construction of Test Apparatus to Identify Different Types of Wood Mechanical Project
  106.   Coconut dehusking Machine Mechanical Engineering Project
  107.   Bus Rapid Transit System Mechanical Engineering Project Report
  108.   BOILER EFFICIENCY AND COOLING TOWER EFFICIENCY Mechanical Final Year Project Report
  109.   BLACK BOX FOR VEHICLES Micro Controller Mechanical Project
  110.   Dept of Mechanical Engineering Biomechatronic Seminar Project Report
  111.   BHEL Project Repot of CNC MACHINES IN VARIOUS FABRICATION PROCESSES
  112.   AUTOMATION OF PNEUMATIC SHEET METAL BENDING MACHINE Mechanical Project
  113.   Mech Project on Automatic Temparature Control of Vaccum Brazing Furnace by using PLC
  114. Acoustics
  115. Analysis
  116. Applied Mechanics
  117. Construction
  118. Cryogenics
  119. Design
  120. Dynamics
  121. Ecofriendly
  122. Energy
  123. Energy Efficient
  124. Engine
  125. Engineering
  126. Fabrication
  127. Fluid Mechanics
  128. Heat
  129. Low-cost
  130. Machines
  131. MATLAB
  132. Modeling
  133. Nano
  134. Neural Network
  135. Performance
  136. Piezoelectric
  137. Power Harvesting
  138. Recycling
  139. Refrigeration
  140. Renewable Energy
  141. Robotics
  142. Simulation
  143. Solar
  144. Solar Energy
  145. Solid Mechanics
  146. Suspension
  147. Turbine
  148. UAV
  149. Vapour Absorption
  150. Vehicle Engineering
  151. Wind
  152. Aeronautics / Space Projects
  153. AutoCAD Projects
  154. Automobile Projects
  155. Design & Development Projects
  156. Energy based Projects
  157. Mechanics Projects
  158. Other Mechanical Projects
  159. Reliability & Maintenance Projects
  160. Thermodynamics Projects
  161. Air Driven Engine Mechanical Engineering Final Year Project ReportThis Air Driven Engine project introduces the Air Driven Engine which is an engine that monitors with compressed air. It...
  162. Hydrogen Fuel Cell Operated Remote Control Car Btech Mechanical ProjectThe Hydrogen Fuel Cell Operated Remote Control Car Btech Mechanical Project makes use of the hydrogen fuel cell like other...
  163. Mechanical Seminar on Six Stroke EngineThe Mechanical Seminar on SIX STROKE ENGINE designs a Beare Head,a new type of Six-Stroke Engine head design  which has...
  164. The Mechanical Working of Metal Mechanical Seminar TopicThe Mechanical Working of Metal Mechanical Seminar Topic is discusses the plastic defomation of metals under action of externally applied forces....
  165. Nano IC Engine Internal Combustion Engine Mech Seminar For StudentsThis Nano IC Engine Internal Combustion Engine Mech Seminar For Students deals with the history, construction of a nano IC engine,...
  166. Sheet Metal Design Mechanical Project ReportSheet metal is basically a metal which is formed into thin, flat pieces. This is one of the most fundamental...
  167. Magnetic Braking System Mechanical Technical PresentationThis MAGNETIC BRAKING SYSTEM Mechanical Technical Presentation introduces the magnetic braking with the help of simple theory, law of Faraday...
  168. AutoCAD ProjectsAuto CAD projects list covers 3D cad design, drafting, modeling. These projects can be useful for mechanical students as final...
  169. Biodiesel in Diesel Engines Latest Mechanical ProjectIntroduction to BIODIESEL IN DIESEL ENGINES: Bio diesel is a vegetable oil that is a clean burning diesel fuel and...
  170. Gasoline Electric Hybrid Car Mechanical Final Year Seminar ReportThis Gasoline Electric Hybrid Car Mechanical Final Year Seminar Report designs and describes the mechanism and operation of Gasoline-Electric Hybrid. 

Robotics& automation Project


ROBOTICS &AUTOMATION PROJECT


Author: Leyla Nazhandali

Smart Vehicles

In this project, students learn how making automobiles more autonomous can make them safer, by providing functionality like anti-lock braking, self parallel parking, and lane departure warnings. In the laboratory, the students work with small motorized cars with infrared sensors, programming the cars to spin in a circle, stop on a line, and follow a curvy path. In the process, the students learn about infrared sensors, motors, and embedded systems. A code framework is provided so that minimal programming skills are required.
View Project Files

Author: Chris Macnab
Manipulating Everyday Objects with Prosthetic Hands
In this project, students learn how prostheses that use robotic technology can improve the lives of people with disabilities. In the laboratory, the students use Lego Mindstorms NXT kits to create an artificial arm or hand that can lift small objects, such as a coffee cup. In the process, students discover and explore the following concepts and ideas: Hooke's Law, hysteresis, Newton's Second Law, accuracy and precision, rapid prototyping, and the relationship between the voltage applied to a motor and its speed.
View Project Files

Author: Sami Khorbotly
Error Correction Codes for Wireless Communication Systems
In this project, students learn how error correction coding makes wireless communications more robust in the presence of noise. In the laboratory, the students work in Matlab to code two simple error correction schemes, and simulate their use in a wireless channel. In the process, they learn concepts such as bit error rate, and see the trade-off between processing time and robustness.
View Project Files

Author: Loren Wyard-Scott
Solid State Lighting for the Developing World
In this project, students learn how solid state lighting technology can improve the lives of people in the developing world, making their evenings more productive and safer. In the laboratory, the students design a portable, solar-charged, LED lamp that can provide two hours of reading light. In the process, they learn about basic circuits, the engineering design cycle, and light. They also compare the efficiency, durability, and cost of lighting technologies.
View Project Files

Author: Taryn Bayles
Energy System Design: A Look at Renewable Energy
In this project, students learn how harvesting energy from renewable sources will help meet the future needs of society. In the laboratory, the students will develop a system to store energy from a renewable source (represented in the laboratory by a light bulb, a box fan, or flowing water). The students will transport the energy, and use it to supply an electrical load (a light bulb) in a different physical location. In the process, students will learn about energy and power, and will learn about
analysis of physical systems, modeling and simulation, and design under constraints.
View Project Files

Author: Stephen Williams
Feedback Controlled Brushless DC Motor with Personal Electric Vehicle Application
In this project, the students learn how brushless DC motors have made personal electric vehicles (PEVs) possible, and calculate how much using a PEV instead of an automobile for some of their daily driving can impact their production of carbon dioxide, based on United States driving patterns. In the laboratory, students build a brushless DC motor using three different control methods, based on a reed switch, a Hall effect sensor, and optoelectronics, respectively. In the process, students learn about motors, and compare the components used for control in terms of their reliability.
View Project Files

Author: Pamela Bhatti
The Coding of Sound by a Cochlear Prosthesis
In this project, students learn how cochlear implants work to improve the lives of people with profound hearing loss. The students experiment with the control parameters of a cochlear implant signal processor using Matlab tools, and learning digital signal processing concepts, including filtering, along the way.
View Project Files

Author: Tom Hartley
Human Energy Generation and Electrical Signal Measurement
In this project, students learn about the energy generation and usage. Emphasis is placed on potential sources of renewable energy, and on how power demands vary from country to country. The students learn how energy is measured, and experiment with generating and storing energy themselves, using an AC generator connected to a bicycle and lead-acid batteries. They measure how long common household appliances can be run on the stored energy, and in the process gain a better understanding of their own personal energy usage.
View Project Files

Author: Loren Wyard-Scott
Pico Power Generation for the Developing World
In this project, students create a power source capable of providing 1 Watt-hour of energy for night-time use. The students learn how access to even a small source of electrical power can make a difference to families in remote, undeveloped areas of the world. They also learn some basics of circuits, energy, and motors and generators, and gain experience with an engineering development process.
View Project Files

Author: Jacques Beneat
Design of a Guitar Tab Player in MATLAB
In this project work with several MATLAB programs to look at the effects of frequency and modeling of signals. The project has two models. In the first module, the students use several MATLAB scripts to discover the effects of sampling, the frequency spectrum of signals, and the modeling of a harmonic signal such as that of a guitar string.
In the second module, the students make use of the modeling efforts of the first module to implement a realistic guitar tab player.
View Project Files

Author: Masoud Agah
Discovering Wireless Sensor Networks: Applications in Structural Health Monitoring, Part 2
This curriculum module is part of a set of four curriculum modules. The curriculum module can be adapted to be used alone, or used as part of the set. In this set of projects, students learn about the importance of monitoring stresses on bridges and other civil infrastructure, and about how public safety can be improved by using wireless sensor networks for continuous structural health monitoring. This curriculum module, the second in the set, introduces topics in micro-electrical-mechanical systems (MEMS), microsystems, and sensors. The students learn how MEMS technology has impacted a wide variety of products and applications, including airbags for automobiles, printheads, Wii controllers, and tools for analysis and sensing in medicine, biology and chemistry. In the lab, they use resistive sensor read-out circuitry developed in the first curriculum module, along with a resistive strain gage, to measure strain as a ruler is deflected. In the process, the students learn about the relationship between the digital signal captured and the physical quantity being sensed, and the factors that influence that relationship.
View Project Files

Author: Allen MacKenzie
Discovering Wireless Sensor Networks: Applications in Structural Health Monitoring, Part 3
This curriculum module is part of a set of four curriculum modules. The curriculum module can be adapted to be used alone, or used as part of the set. In this project, students learn about the importance of monitoring stresses on bridges and other civil infrastructure, and about how public safety can be improved by using wireless sensor networks for continuous structural health monitoring. This curriculum module, the third in the set, introduces topics in radio-frequency wireless data communications. The students learn how wireless communications makes it possible to continuously monitor civil infrastructure from a remote location. In the lab, they experiment with the design of random access medium access control protocols for wireless sensor networks, which enable multiple sensors to share a radio channel. In the process, they see design trade-offs involving complexity, efficiency, and fairness.
View Project Files

Author: Sanjay Raman
Discovering Wireless Sensor Networks: Applications in Structural Health Monitoring, Part 1
This curriculum module is part of a set of four curriculum modules. The curriculum module can be adapted to be used alone, or used as part of the set. In this project, students learn about the importance of monitoring stresses on bridges and other civil infrastructure, and about how public safety can be improved by using wireless sensor networks for continuous structural health monitoring. This curriculum module, the first in the set, introduces topics in sensor read-out electronics and data conversion. The students build a resistance bridge to measure an unknown resistance, which is sensed with an instrumentation amplifier and converted to a digital signal using an analog-to-digital converter. In the process, the students learn some circuit and sensor basics, and about the quantization error inherent in digital signals.
View Project Files

Author: Luiz DaSilva
Discovering Wireless Sensor Networks: Applications in Structural Health Monitoring, Part 4
This curriculum module is part of a set of four curriculum modules. The curriculum module can be adapted to be used alone, or used as part of the set. In this set of projects, students learn about the importance of monitoring stresses on bridges and other civil infrastructure, and about how public safety can be improved by using wireless sensor networks for continuous structural health monitoring. This curriculum module, the fourth in the set, introduces topics in wireless sensor networks. The students learn about a variety of applications for wireless sensor networks, including environmental sensing, health applications, location tracking, and the identification of seismic events. In the lab, they use Zigbee-ready boards and resistive strain sensors developed earlier to build a wireless sensor network, and cooperate to send and aggregate strain data. A design exercise involves instrumentation of the I-35W Mississippi River bridge, which collapsed in 2007. In the process of doing the lab and design exercise, the students learn how physical limitations such as transmission range affects the design of wireless sensor networks.
View Project Files

Author: Kamyar Dezhgosha
Map Mashups for Better Visualization of Location-Based Trends
In this project, students learn that map mashups can help improve understanding of a societal problem by allowing better visualization of location-based trends; for example, map mashups can be used to show the spread of epidemics, or the relative rates of child poverty, color coded on a map in an interactive and graphical way. The students learn how to program a map mashup, using the Google Maps API. In the process, they learn about object-oriented programming and web applications. Two versions of the project are provided, for students with and without prior experience in object-oriented programming (OOP). Version 2, for students with experience in OOP, has been zipped into one file listed under "Additional Project Materials".
View Project Files

Author: Nicky Mostert-Phipps
Developing a Personally Controlled Health Record (PCHR) Using Microsoft Visual C#
In this project, students learn how personally controlled health records can make it possible for a person to capture, access, and manage his or her own health information in a convenient and secure way. They learn how these records can improve quality of care by improving communication between multiple healthcare providers, and reduce costs by avoiding unnecessary duplication of medical tests. In the laboratory, students use C# to program personally controlled health records. Along the way, they learn programming skills, about how encryption can be used to secure data, and about the design of user-friendly user interfaces.
View Project Files

Author: Javier Resano
Digital Logic for Medicine and Biology Research: A hardware implementation of the Smith-Waterman algorithm for DNA comparison
In this project, students learn that the comparison of DNA sequences is important to a wide variety of applications in medicine and biology, including the analyses of ecosystem biodiversity, cancer mutations and the evolution of viruses. The students learn that specialized yet inexpensive digital hardware based on field programmable gate arrays can help speed the analysis of DNA sequences. They design and test a simple implementation of the Smith-Waterman algorithm that is broadly used for DNA sequence comparisons. In the process, they learn about computational platforms, digital logic, and a divide-and-conquer approach to design.
View Project Files

Author: Yanfei Liu
Energy Scavenging from Vibrations
In this project, students learn that energy can be harvested or scavenged from the surrounding environment, in sufficient quantities for use in powering embedded systems. In the laboratory, students design and build a system using Lego pieces and a piezoelectric buzzer that harvests energy from vibrations and uses the energy to charge a battery. Along the way, the students learn about dc motors, cams and gears, piezoelectric material, and circuits for charging.
View Project Files

Author: Andrea Mitofsky
Language Identification Software
In this project, students learn how it is possible to identify the language in which a text file is written, a necessary first step in automatic translation of information from one language to another. In the laboratory, the students write Java programs to compute histograms of letter frequencies in text files, and explore how letter frequencies vary in Italian, German, and English. Along the way, they learn about ASCII codes, and about how sampling a longer portion of a text takes longer, but produces a more accurate accounting of letter frequency for that text.
View Project Files

Author: Sami Khorbotly
Embedding Data in Digital Images
In this project, students learn how digital watermarking is used to authenticate and protect copyrights in digital multimedia by permanently embedding data (a watermark) in the object of interest that only the original owner can change or remove. In the process, they learn how digital images are represented in binary format and stored, and work in Matlab, becoming familiar with matrices, arrays, and strings, and learning various techniques for data manipulation.
View Project Files

Author: Alfred Yu
Electrocardiogram Amplifier Design Using Basic Electronic Parts
This project is broadly centered around the topic of biomedical circuits. Its overall aim is to provide biomedical or electronic engineering students with a hands-on opportunity to develop an electrocardiogram (ECG) amplifier circuit from scratch and thereby learn more about the technical details of bio-potential measurement devices.
View Project Files

Author: Amy Bell
Arrhythmia Detection Algorithms for Implantable Cardioverter Defibrillators
In this project, students learn how implantable cardioverter defibrillators allow people with certain kinds of cardiac arrhythmias to live normal, active lives. In the laboratory, the students use Matlab to investigate algorithms for quickly and accurately detecting the abnormal heart rhythms that require intervention. Along the way, they learn that signals can be processed in both the time and frequency domains, and how the complexity of an algorithm affects how quickly it runs. They also consider the ethics of an actual case in which a maker of defibrillators discovered a flaw in their device, but delayed publicizing the flaw for three years.
View Project Files

Author: Warren Rosen
Microcontroller-based Smart House for Improved Energy Efficiency
In this hands on Real World Engineering project the students will program a simple microcontroller to measure temperature and control functions such as heaters or coolers in a prebuilt smart house. The house is made of a foam shell electric heater, thermoelectric air conditioner and an attic fan with vent.
View Project Files

Author: Dmitriy Garmatyuk
Water Desalination via Energy-Efficient Capacitive Deionization (CDI) Technology
The project focuses on the new desalination technology for brackish water - capacitive deionization (CDI). Basics of electrostatics, engineering instrumentation and measurements, and design cycle are introduced. The students will assemble and test a functioning low-power, portable water desalination device.
View Project Files

Author: David Lin
Remote Surgical Robotics: Control Systems and Human-Machine Interfacing
This Real-World Engineering Project focuses on optimizing a prototype remote surgical robot which has force-feedback capabilities. The objective is to detect the surface of a gelatin brain by tactile perception through the robot. Students explore the tradeoff between sensitivity and range while considering human factors as design constrains.
View Project Files

Author: Anita Vasavada
Vehicle Passenger Safety: Exploring Whiplash Protection Systems
In this Real World Engineering Project, students will design and evaluate an active head restraint system.
-Learning about whiplash injury, and characterizing a physical model of the human head-neck system.
-Evaluating the physical model in the context of neck injury testing, and designing a head restraint which can limit head movements during a collision.
-Characterizing a motor and specifying commands which can move the head restraint appropriately when an impact occurs.
-Evaluating a sensor which will activate the motor before an impact occurs.
-Testing the ability of the entire active head restraint system to limit head motion during a simulated rear-end collision.
View Project Files

Author: James Smith
Birth Weight Measurement in Midwifery and Mobile Health Care Delivery
Child birth is one of the most fundamental events in human existence. A key indicator used in the assessment of a baby after a successful birth is the baby's birth weight, as well as the baby's weight in subsequent checkups. Underweight babies have a demonstrated higher rate of mortality and are at high risk of developing a number of serious medical conditions. Identification of risk factors associated with birth weight is, therefore, an important task in post-term child healthcare provision. In this Real World Engineering Project, students are asked to design and construct a mechanical or electromechanical system to measure the weight of a baby immediately after birth and at discrete intervals representing growth over a two month period.
View Project Files

Author: Felipe Perrone
Software Engineering: Public Service Announcement Movies Made with the Alice Programming Language
In this hands-on project students will develop stronger teamwork skills; create an animated PSA using Alice, a visual programming language; learn to use technology for mass communication and also receive an introduction to computer programming; put in practice the engineering design process, and have the opportunity to contribute to society by raising awareness to an important issue.
This software engineering project is centered on the idea of developing public service announcement movies with the Alice programming language. The proposal has emerged from the application of this project six different times in the context of an introduction to engineering course. This past history proved that the project is effective in teaching first-year college students the fundamentals of object-oriented programming in the context of the engineering design process.
View Project Files

Author: Gregorio Cappuccino
Coping with the Emerging Energy Demand for Charging Plug-in Electric Vehicles
In this hands-on project, student teams will be engaged to cope with the very hot real-world problem arising from the increasing demand for charging Plug-in Electric Vehicles from the electrical energy distribution grid. By means of MATLAB simulations, each team will analyze the effect of multiple quasi-contemporary charging requests on the electrical grid, hence discovering how, as the number of users to be charged increases, either the grid collapses or the user requests may not be entirely fulfilled. The class will discover how smart energy dispatching strategies and smart battery charging methods may mitigate or completely overcome the discussed problems. The class will also be asked to reflect on how the traditional “dumb” grid infrastructure should be modified to allow each proposed solution to be really implemented, finding out the necessity of developing a smart grid capable of interacting with vehicles.
View Project Files

Author: Tomas Ward
An adjustable movement-triggered switch access system for people with disabilities
In this project using an accelerometer, a relay and some basic analog signal processing circuits, students will develop a movement-triggered (tilt) switching system that can be used as a piece of assistive technology (AT) for people with disabilities. As a basic illustration of the concept students will use this switching system to turn on and off a simple battery-operated device such as a radio, fan, etc.
View Project Files

Author: Christopher Kitts
Discovering Signal and Data Processing/Analysis Through Satellite Communications
This project involves the design and use of a simple, low-cost, receive-only satellite communication system compatible with numerous on-orbit spacecraft that continuously broadcast publicly available, amateur radio data signals. In general, this type of system solves the problem of remotely communicating with and controlling satellites (or other remote systems), a function that is necessary in order to cost-effectively provide satellite-based services such as global communications, weather monitoring, and scientific exploration. The receive-only communication system developed for this project accomplishes this task by supporting functions such as a) pointing the station antenna to the satellite (which may or may not be moving across the sky), and b) wirelessly receiving satellite audio signals. This laboratory allows students to explore concepts such as orbital motion and wireless communications. It also provides team-based hands-on prototyping and use of the station. A follow-on laboratory will be available in the future in order to extend the station with functions to decode digital telemetry signals and to process this data to support interpretation and analysis.
View Project Files

Author: Ayanna Howard
Accessible Apps: Decoding of the World for the Visually Impaired
The project will illustrate the real-world contributions engineers make to society by showcasing how they can improve the quality of life for individuals with visual impairments. This real world-engineering project will enable students to expand access to the world for the visually impaired by coupling mobile device applications with auditory modality.
View Project Files

Author: Mingrui Zhang
Image Processing Algorithms for Identifying the Gulf Oil Spill
The Gulf of Mexico oil spill between April 20 and September 19, 2010 was the largest offshore spill in U.S. history. Computer algorithms need to be developed to map oil contaminated areas. In this project students are asked to design image processing algorithms to locate and map oil spills on MODIS satellite images and implement the algorithms in Java-based software application. MODIS satellite images are prepared in BMP format for use.
View Project Files

Ec Projects

Electronics Engineering Projects
 
  1. Construction of microcontroller based Touchscreen Mobile Phone with Password protected features.
  2. Universal Remote Control with Haptic Interface
  3. Touch Screen GLCD based Digital Devices Control System
  4. MEMS Accelerometer based tilt operated Graphical LCD and memory stick based textbook reading system.
  5. Evaluation of the tongue drive system by individuals with high-level spinal cord injury (IEEE 2009).
  6. GSM Based Automatic Energy Meter Reading System
  7. USB Memory Stick Data Logger.  Measured values are stored in to a USB Pen Drive.
  8. Microcontroller based GPS Data Logger into MMC/SD Card.
  9. Triac and optically isolated diac based electrical oven temperature monitoring and controlling system with zero-crossing detector.
  10. Voice Operated Guidance Systems for Vision Impaired People. (Speech Recognition, Voice Guidance, Ultrasonic Obstacle sensor and GPS Receiver).
  11. GSM based Irrigation Water Pump Controller for Illiterates. (No Mobile phone operation knowledge required)
  12. Smartphone blutooth controlled Robot.
  13. Implementation of location based advertisement system using GPS and Graphical LCD.
  14. Innovative keyboard construction with only one input pin.
  15. RFID and GSM based intelligent letterbox (mailbox).
  16. Wireless energy meter monitoring system with automatic tariff calculation on handheld.
  17. Image based password authentication for Illiterates with Touchscreen.
  18. Google Android operated Smart Home.
  19. Speaking microcontroller for deaf and dumb.
  20. Wireless GoogleEarth control system at Railway/Bus Stations for tourist’s route map guidance.
  21. Virtual wireless dancing bells for classical dancers.
  22. Touchscreen based temperature monitoring and control system with graphical LCD.
  23. Location driven car music player. (Plays devotional songs near temples, shuts at home etc.)
  24. GPS based asset/vehicle/animal/child tracking system.
  25. Automatic Closed loop tire pressure monitoring and control system.
  26. Microcontroller and Touchscreen based wireless library book catalog system.
  27. Touchscreen based Nurse/attendant calling system for physically impaired.
  28. Graphical LCD and Memory stick (MMC/SD card) based textbook reading system.
  29. Mobile phone controlled four-legged walking robot with speed and direction control.
  30. GPS based universal clock. Gets the time from satellites and displays on GLCD.
  31. Microcontroller based online examination system with dynamic questions.
  32. Digital vehicle speedometer with password enabled speed limit setting.
  33. GPS based vehicle travel location-logging system. This System stores the traveler’s geographical location and speed at an interval of one second and is stored in to 1GB MMC/SD memory card.
  34. SMS based remote SIM card’s address book access system.
  35. Microcontroller based digital clock with Graphical LCD and Sanskrit font (or Any regional font) Numbers.
  36. Microcontroller based virtual boundary/fencing for Wild Animals.
  37. GSM based instantaneous vehicle registration details extraction system very useful for Traffic police.
  38. Wireless Heartbeat Monitoring and Alert system.
  39. RFID/Mifare/Smart Card based security access control systems.
  40. GPS and GSM based real-time vehicle tracking on GoogleEarth (with two GSM Modems)
  41. Implementation of wireless sensors network for Wild Fire monitoring system.
  42. Real-time Heartbeat Monitoring system with display on Graphical LCD and Voice based alerting system.
  43. Touchscreen operated liquid dispensing system.
  44. Infrared (IR) remote controlled Muscle Stimulator with duration and intensity control.
  45. GPS based border alert system for fishermen.
  46. MEMS Accelerometer based digital photo frame with automatic position/view adjustment system (similar to digital cameras).
  47. Construction of Touchscreen based portable Digital Clock.
  48. GPS and Graphical display based tourist-guiding system with Touchscreen keyboard input for dynamic location recording. This can be used any where in the world including Sea and Forest locations.
  49. Microcontroller and RF transceiver based chatting application with Touchscreen keyboard implementation.
  50. Travel assistant for blind with dynamic user input for location based alerts.
  51. Telugu Tutor with dynamic text and Images identification for elementary school kids.
  52. Micro Electro Mechanical Sensor (MEMS) Accelerometer/Gyroscope based self-balancing robot.
  53. Military persons training system that monitors the speed at which they move and records the calculated traveled distance with the time.
  54. GPS based office cab monitoring system very useful for the safety of female employees. This system records the travel path and location with timings. Also records the destination of each employee home.
  55. GPS based station name announcement and display system for Trains/buses.
  56. Microcontroller and voice based alerting system for blind people with GPS enabled location identification.
  57. GPS based navigator with location display on Graphical LCD.  This provides user to have the location information displayed in any language.
  58. Advanced GPS based navigator for illiterates.
  59. Live Human being detection wireless remote controlled Robot. (Useful for detection of terrorists hiding inside buildings)
  60. Radio Frequency based remote controlled robot with wireless video camera mounted on it.
  61. Autonomous Robot with artificial vision for obstacle detection.
  62. Accelerometer (Gyroscope) Controlled Robot. Accelerometer is mems based 3-axis sensor that can sense the tilt in of the 3-diamentions. The robot moment is controlled based on the tilt angle of the robot. No need to press any buttons for robot control.
  63. Mobile technology (GSM) based remote monitoring and control of digital Energy meter. Useful for Electricity Department personal for remote meter reading. Also useful to disconnect the power supply to consumer incase of non-payment of electric bill. This is also used to exchange messages like power cut timings with the consumers.
  64. Microcontroller and GPS based geographical map drawing instrument. Very useful for Civil engineers.
  65. Touchscreen controlled motor speed and direction controlling system.
  66. GSM based digital Notice board with display on Monitor or LCD display.
  67. PIR based energy conservation system for corporate Computers and lighting system.
  68. Remote control of critical software applications with mobile phone.
  69. Microcontroller based dual Lithium-ion battery charger with automated charge and discharge cycles.
  70. Virtual distance measuring tape with Graphical LCD. Very useful for roads and buildings department. One man operable and works on anywhere on earth.
  71. Radio Frequency wireless remote controlled digital camera with high power LED based focusing light. The camera direction can be controlled remotely and the video images can be seen live on TV.
  72. Wireless Speedo meter for boat/ship with speed and location limit alerts.
  73. GPS based travel assistant for blind people.
  74. Touch Screen based digital devices control system. This project is to build a Graphical LCD Touch Screen interface for switching electrical devices. The controlled devices can be of high voltage or low voltage.
  75. GSM Mobile phone controlled intelligent Robot.
  76. Automatic Intelligent Plant Watering System.
  77. DC Motor Speed and direction control over GSM Mobile/Modem.
  78. Mobile phone controlled Street Light monitoring and control system.
  79. UPS battery monitoring system over GSM for high availability systems (banking/finance/medical etc).
  80. Touchscreen controlled lamp dimmer for next generation apartments.
  81. Soil Moisture sensor based intelligent irrigation water pump controlling system with GSM technology.
  82. DTMF mobile phone controlled dam water gates controlling system with high-level protection.
  83. DC Motor Speed and direction control using RF/IR/Zigbee technologies.
  84. Hazardous chemical valve control system with stepper motor and line of site remote control.
  85. Contact less Motor speed monitoring on Graphical display with high and low speed alerts.
  86. Liquid dispensing system with adjustable quantity for industrial use.
  87. Password enabled pre-paid liquid/milk dispensing system.
  88. Wireless Energy Meter monitoring system with automatic tariff calculation.
  89. Data logger for energy meter with time and KWH readings. Very useful for historical data logging and analysis.
  90. High voltage fuse blown indicator with Voice based announcement system.
  91. Voice enabled devices switching for visually impaired.
  92. RF transceiver (Zigbee/X-Bee) based energy meter monitoring system. (Energy Meter reading on PC over wireless comm.)
  93. GSM based SCADA (Supervisory Control and Data Acquisition) implementation.
  94. SCADA system design and construction for real-time electrical parameter monitoring and control.
  95. Timer based Electrical Oven temperature monitoring and control for Metal Industries.
  96. Timer based automatic power cutoff for industrial sealing/packaging machines.
  97. GPS & GSM Based Car Security System.
Easy to find the stolen Car. Global Positioning Sytem (GPS) has been used in various commercial applications including transportation, navigation and vehicle position tracking, which when coupled with GSM mobile phone technology, the technology can help locate stolen vehicle and retrieval process.
GPS GSM Vehicle Security System (GPS+GSM+Microcontroller)
  1. Standalone GPS Coordinates(Latitude,Longitude...) Locater. (GPS+Microcontroller+LCD)
The purpose this project is to get the Latitude and Longitude from the satellites and display them on LCD display.
  1. GPS & GSM Based Realtime Vehicle Tracking System.
This system locates the Vehicle on the earth by the use of GPS and sends the co-ordinates (Longitude & Latitude), Time and Vehicle speed to the owner of the vehicle using GSM Modem.
(GPS+GSM+Microcontroller)
  1. Microcontroller driven GPS Clock (GPS+Microcontroller+LCD)
GPS Clock
This updates time (GMT) from satellites and displays on LCD.
  1. GSM/Mobile/Cell Phone Based Device Monitoring and Control Ststem.
The purpose of this project is to Monitor and Control any Digital or Analog devices from your Cell Phone. This Project can be used to control up to 16 electrical devices. With this circuit you can switch-ON , OFF or Restart some Linux servers, ADSL modems, Printers, Door with electric lock, Irrigation Pump, Garage door, House lights, Water pumps, electric sunshade, Block the engine of your car or your motorcycle, at the steal case and much more. The purpose of this circuit is to make the human life better and easier.
GSM Remote Monitoring
(GSM Modem/Mobile/Cell Phone)+ Microcontroller)
  1. GSM Based Home Security System. Get intrusion alerts like door/windows open alerts onto your Cell Phone. (GSM+Microcontroller)
  2. GSM Based Automatic Irrigation Water Controller System.
    The purpose of this project is to get SMS alerts whenever the electrical power status changes to ON or OFF. Use your mobile phone to switch on/off the water pump from any location in the world. (GSM Modem + Microcontroller + Electromagnetic Relays)
  3. Automatic Intelligent Plant Watering System (Microcontroller + Rain Sensor)
  4. Wireless Stepper Motor Controller (Radio Rx/Tx + Stepper Motor + Microcontroller)
  5. IR Remote Stepper Motor Controller. Control stepper motor usnig TV remote. (IR Remote + Stepper Motor + Microcontroller)
  6. RC5 IR Based Remote Device Switching (IR Remote + Microcontroller + Device Relays)
  7. Digital Tachometer (Non-contact)
  8. (Microcontroller Board + Sensors + LCD)
  9. Digital Frequency Meter (Microcontroller Board + Sensors + LCD)
  10. Digital Voltmeter (Microcontroller Board + Sensors + LCD)
  11. Real-time SCADA (Microcontroller Board + Sensors + PC Software)
  12. Electrical Data(voltage,current,frequency etc..) Logger (SCADA) (Microcontroller Board + Sensors + MMC/SD Memory + PC Sortware)
  13. Digital Multimeter (Microcontroller Board + Sensors + LCD)
  14. uC based Solar Tracker with Stepper Motor Control Solar Tracker
    (Microcontroller Board + Stepper Motor + Sensors)
  15. Automatic Room Illumination Control (Microcontroller Board + Sensors)
  16. Automatic Temperature Measurement and Control (Microcontroller Board + Sensors + LCD)
  17. Closed loop DC Motor Speed Controller (Microcontroller Board + Sensors + LCD + DC Motor)
  18. PWM DC Motor Speed Controller (Microcontroller Board + Sensors + LCD + DC Motor)
  19. Frequency Locked Loop DC Motor Speed Control (Microcontroller Board + Sensors + LCD + DC Motor)
  20. GPS Navigator/Logger (Microcontroller Board + Memory Card +PC Software)
  21. RF Control Of Induction/DC/Stepper Motor & Other Industrial Loads
  22. Voltage/Current/Frequency Reading with IR Remote
  23. Microcontroller based Heartbeat Monitor with LCD Display.
    The design was carried out through the use of two infrared sensors. The sensors check blood density on the patient's fingertips in order to measure heart rate. The raw data from the sensors is processed by microcontroller and the processed data is sent to LCD display.
  24. Microcontroller based Heartbeat Monitor with Display On Computer.
    same as above but the processed data is sent to PC.
  25. uC based Wireless(Radio/IR) Heartbeat Monitor
  26. uC based Heartbeat Monitoring over GSM Mobile.
    The design was carried out through the use of two infrared sensors. The sensors check blood density on the patient's fingertips in order to measure heart rate. The raw data from the sensors is processed by microcontroller and the processed data is sent to user over GSM modem/mobile
  27. uC based Wireless Temperature Measurement
  28. Temperature Measurement over GSM Mobile.
    The purpose of this project is to measure the temperature using LM35 sensor. This temperature is processed by microcontroller and sent to the user over GSM mobile.
  29. uC based Closed Loop Temperature Control
  30. Temperature Measurement over GSM Mobile.
    The purpose of this project is to measure the temperature using LM35 sensor. This temperature is processed by microcontroller and sent to the user over GSM mobile.
  31. uC based Closed Loop Temperature Control
  32. AC/DC/Stepper Motor Closed Loop Speed Control
  33. Motor Speed Monitoring over GSM Mobile
  34. uC based Real Time Clock with (2x16) LCD Display
  35. uC based Real Time Clock and Multiple Device control based on Time and Date.
  36. uC based MMC/SD Memory Card Interfacing. (Data Logger)
  37. uC based MMC/SD Memory Card Interfaceing with FAT File System. (Data Logger)
  38. DC Voltage and Current Meter With LCD Display
  39. DC Voltage and Current Meter With PC Display.
  40. uC based Multiple Device Control based on Change in Input Frequency.
  41. Multi Channel Frequency Measurement with LCD Display
  42. Multi Channle Voltage Measurement with LCD Display
  43. Multi Channle Voltage Measurement with PC Display
  44. Multi Channel Frequency Measurement with PC Display
  45. Microcontroller based GPS Navigator with Google Earth Interface and MMC/SD 1GB Card Data Logging
  46. GPS+GSM based Realtime Bus/Train Location Finder and display on Earth's Map
    GPS Vehicle Tracking
  47. Microcontroller based Temperature Measurement and Relay Control with PC Interface
    PC Temparature Control Interface
  48. Microcontroller to PC USB Interface With Device Control + PC Software (.NET or VC++)
  49. uC to PC Serial Interface With Device Control + PC Software (.NET or VC++)
  50. Digital Compass and GPS based Navigation System.
  51. Wireless SCADA.
  52. VRBot and EasyVR based Interactive Speech Recognition System.
  53. Wireless Heartbeat Sensor (GSM based)
  54. Standalone Heartbeat Data Logger (MCU+SD/MMC 1GB Card+Sensors)
The purpose of this project is to log the heartbeat data into the MMC memory stick. The data for the duration upto One Month can be logged continuously
  1. GSM Based Irrigation System
  2. Microcontroller Based Temperature Monitoring & Control
  3. Function Generator Using Microcontroller
  4. Microcontroller based Substation Monitoring and control System
  5. Microcontroller based Generator/Alternator Control and Monitoring System.
  6. Electrical Data (voltage, current, frequency etc...) Logger (SCADA)
  7. Microcontroller based Single phasing preventor.
  8. Automatic Rotor Resistance Controller using Microcontroller
  9. Digital Vehicle Dash Board
  10. Wifi and TFT Color LCD based wireless Home automation.
  11. PIR Sensor based Intrusion Detection System
  12. PIR + GSM based Home Security System
  13. PC Controlled Digital Devices
  14. PC Controlled Analog Devices
  15. Microcontroller to PC Iteraction Using VC++ GUI Application
  16. Microcontroller to PC Iteraction Using VB GUI Application
  17. Microcontroller to PC Iteraction Using Java Applet based Application
  18. Microcontroller to Microcontroller Infrared based communication.
  19. Solar data logger into MMC/SD Memory Card.
  20. Microcontroller based refrigeration control system.
  21. Temperature Analyzers with computerized graphical image.
  22. Interfacing Microcontroller to Cellphone graphical display.
  23. DS1307 and Microcontroller based TV remote controlled Digital Clock.
  24. Microcontroller based Hardware(USB or Serial) key implementation for any software based applications.
  25. Microcontroller and GPS based geographical map drawing instrument. Very useful for Civil engineers.
  26. Microcontroller Digital Access Control System
  27. Password protected IR based Device Control.
  28. Using Magneto-Inductive Sensors to Detect Tongue Position in a Wireless Assistive Technology for People with Severe Disabilities (IEEE 2007).
  29. Password protected GSM based Device control
  30. Remote Control of PC/Computer using GSM Modem or Cell Phone.
  31. Microcontroller based automatic liquid dispensing system. Used in Tea/Coffee, Soft Drink vending machines.
  32. Usb 2.0 Hardware implimentation using PIC 18F2550/18F4550 16-bit advanced microcontroller. (With PC side VC++ application).
  33. GSM+GPS based school kids tracking system.
  34. Microcontroller based Automatic Railway Gate Control System.
This project is to control the railway gate system automatically by sensing the train movement. This gives the visual and voice alerts to users crossing the rail path. This can also count the number of trains passings in both directions per day or hour.
  1.  Wireless Digital Camera Controller.
Using this project the digital camera can be controlled remotely using RF Transmitter and Receiver. The controls include taking picture snaps, switching on the flash light, changing camera direction using stepper motor etc.
Note: Digital Camera also will be given to the students along with microcontroller hardware kit.
  1.  GSM based Highway vehicle traffic monitoring system.
The purpose of this project is to monitor the vehciles moving on highways at remote locations. This project uses infrared/laser sensor system to count the number of vehicles passing in both the directions. The vehicle count is logged by the microcontroller. This vehicles information is sent to the user over GSM modem. The information can be sent to the user periodically or can be sent on demand by sending a missed call or SMS.
  1. Zigbee and Touchscreen Controlled PC.
  2. Advanced vehicle tracking and automatic crash notification using GPS and GSM technology with Location Name as SMS.
  3. Touchscreen based Ordering System for Restaurants.
  4. Wearable technology for wireless gadgets control.
  5. Using Unconstrained Tongue Motion as an Alternative Control Mechanism for Wheeled Mobility (IEEE 2009).
  6. Touchscreen based wireless communication assistant for dumb/illiterates in Airlines.
  7. Microcontroller and Triac based realtime temperature monitoring and control
  8. Design and Construction of MEMS Accelerometer based Tilt Operated touch free mobile phone.
  9. RFID and GSM based intelligent courier/letter collection box.
  10. MEMS Accelerometer based Tilt Operated wireless phonebook copying to PC.
  11. Wireless touchscreen based multi-patient health monitoring system for corporate hospitals.
  12. Wireless PC based multi-patient health monitoring system for Corporate Hospitals.
  13. Wifi networking based Industrial automation.
  14. GPS & GSM based Human Health Monitoring and Alert System with patient’s location on earth.
  15. Construction of Intelligent Digital weighing Machine.
  16. Intelligent mobile phone with GPS enabled features.
  17. Radio Frequency based wireless remote controlled digital camera with high power focus LED
  18. Touchscreen based Wireless Language Translator in Airlines using Zigbee.
  19. Dual GSM Modems based irrigation water pump controller for illiterates.
  20. Zigbee based Wireless Energy Meter reading system.
  21. Wireless control of powered wheelchairs with tongue motion using tongue drive assistive technology (IEEE 2008).
  22. Zigbee based Wireless Energy Meter reading logging system on PC.
  23. ARM7 Cortex M3 based USB Host Data Logger.
  24. Head movement based voice enabled wireless
  25. Micro controller based Wireless matchbox with digital lantern.
  26. Android Smart Phone operated Robot with bluetooth control.
  27. Solar based air compressor pump for car bike tire inflate
  28. Voice operated Intelligent Fire extinguisher vehicle
  29. GPRS based real-time device status logger into sooxma website
  30. Intelligent Robot controlled by Wi-Fi communication
  31. CAN communication for vehicles
  32. Bluetooth devices based access control system without built-in application
  33. Android speech recognition based Lamp dimmer
  34. Android speech recognition based Home automation
  35. Android controlled scrolling LED message display
  36. WiFi and PC based advanced Home Automation system.
  37. A WIFI based Smart Wireless Sensor Network for Monitoring an Agricultural Environment